Richie Appleseed Anderson

- Full Time
(Subaru Touring converted camper)

Hand crafted pizza chef

Hand crafted pizza chef





Deli chef and crafted pizza maker

Resume’

133 Wildwood Rd
Apt. 433
Newport, NC 28570
Cell: (704) 249-9523 Rander5006@yahoo.com

Ri c h a r d I . A n d e r s o n J r .

Retirement Objective To utilize and share my 30 years plus, management skill set, to develop a team spirit, continual improvement of processes and computer skills. Customer Satisfaction is tantamount to any business success.

Career Objective: To continue in the field of Quality Management Systems and Auditing Systems. Environmental Quality. Establish and maintain ISO 9001:2015 and AS9100D (Aerospace) Quality Management Systems.

Continue to cut production waste and reduce cost in manufacturing processes utilizing Lean Manufacturing Tools.

Lead by fostering a common company work environment, policy directive with a team spirit and a cohesive team.
Successes Training in ISO9001Environmental Quality System Quality Management Systems and Quality Reliability- 2015, Quality Management Systems and Quality Reliability ISO14001. 5S events to reduce non-value-added steps cutting 40% of time and cost from processes. Reduced PPM levels by 60%, well below the corporate target objectives.

Experience Associate in Sales
Home Depot
Nov 2018 - Dec 2019

Sales in Plumbing, Electrical and Hardware. Utilized Multiple heavy Equipment user.

Experience Fresh Food Associate
Harris Teeter
Feb 2020 - Current

Fresh Food Associate within Deli and Chef.

Retired Early from Aerospace Engineering career – July 26, 2018

11/2014 – 7/2017 – Transaxle Manufacturing of America – John Deere Rock Hill, SC
Supply Chain Quality Engineer
Auditing to ISO9001:2015 requirements subtler suppliers. Implement and maintain AIAG PPAP documentation for suppliers and customers. Ensured all and domestic and foreign customers and suppliers met the requirement of DPAR, PPAP, 5 Samples
30 Cpk for critical dimensioning

2014 - 2014 - Dynamic Solutions, LLC – Boeing Contractor Charleston, SC
Quality Assurance Systems Manager
Quality Representative for AS9100
Company Closure
▪ Establish and maintain ISO9001:2008 Quality Management Systems. Reviewing contract review process against customer PO special requirements and quality clauses. Ensure job traveler requirements are placed within the manufacturing documentation during the process flows.
▪ Focus on risk management activities and design control activities during NPI development or production change activities.
▪ Review specific requirements for documentation and validation of processes.
▪ Specific requirements for verification of the effectiveness of corrective and preventive actions.
▪ Track all quality Key Process Indicators (KPI) and utilize data for continuous improvements.
▪ Train all company personnel in the initiation, implementation and function of ISO9001-2008 Quality
▪ Monitoring to closure of internal customer and supplier 8D CAPA.
▪ AS9102 - First Article Report approvals
▪ PPE controls in the work environment to ensure product safety

2013 – 2014 Boeing Aircraft Company Fort Wayne, IN
Boeing Quality Project Contract Specialist via Verify, Inc.
Onsite at BAE Systems to improve ISO 9001-2000 quality metrics and continual improvement events as in process optimization

2011 – 2013 AB Interconnect, Inc. Smithfield, NC
Manager of Quality Assurance
Responsible for measurement and monitoring of Quality Management Systems, (QMS) Key Process Indicators

Manager Representative for ISO 9001.2008 and AS9100C-2009 Aerospace Standards.

▪ Welding processes, MIG, TIG, Ferrous and non-Ferrous Materials, Welding per D1.2/D1.2M:2003 Aluminum, series 2000- 7000 Specific requirements for documentation and validation of processes. Utilized NADCAP to establish welding department for fabrication.

▪ Machined and Inspected Investment and Die





Castings. Certified for compliance, including Mechanical Properties and Chemical Analysis.
▪ Reviewing contract review process against customer PO special requirements and quality clauses. Ensure job traveler requirements are placed within the manufacturing documentation during the process flows.
▪ Focus on risk management activities and design control activities during NPI development or production change activities.
▪ Review specific requirements for documentation and validation of processes.
▪ Specific requirements for verification of the effectiveness of corrective and preventive actions.
▪ Track all quality Key Process Indicators (KPI) and utilize data for continuous improvements.
▪ Monitoring to closure of internal customer and supplier 8D CAPA.
▪ AS9102 - First Article Report approvals
▪ PPE controls in the work environment to ensure product safety


2009 – 2011 Firth Rixson Metallurgical

CONTRACT
Manager of Quality Assurance Verdi, NV

▪ Managed AWS welding activities, TIG and MIG for nickel alloys, ferrous and non-ferrous materials.

▪ NDT processes and rework as required.

▪ Responsible for Metallurgical Processes, Heat Treat to NADCAP and Testing Material. team efforts among all employees. Worked
close with manufacturing and engineering w machined components to customer requirements

▪ Responsible for Quality Management Systems, AS9100 (QMS) and ISO 14001
Environmental Quality Systems (EMS). Manager Representative for all related quality standards

Proficient in CMM Methodology and Surface Plate Layout

CNC Machining and Special Process Background for GE, Rolls Royce jet aircraft engine Titanium rings, Inconel 625 and other exotic metals

▪ Lathe Turning/ Continuous Feed
▪ 3 and 5 Axis Milling
▪ ID/OD and Surface Grinding
▪ Metallurgy and Heat Treat background
▪ Welding per 2219 (NADCAP approved) TIG and MIG
▪ Sheet Metal stamping, hydroforming, press brake forming and fabrication

2001–2009 Avnet Logistics Chandler, AZ
Facility Quality Systems Manager
▪ Contract Review requirements are reviewed and implemented to the manufacturing process. AIAG requirements were reviewed and accurate prior to
▪ Managed Material Board (MRB) dispositions
▪ Controls in the work environment to ensure product safety.
▪ Focus on quality risk management activities and design control activities during NPI product development and existing processes.
▪ Specific requirements for verification of the effectiveness of corrective and preventive actions.

1998 – 2001 ISO Integration Plus, Inc. Mesa, AZ
Sole Proprietor - Owner
▪ Initiated and implemented ISO 9001, AS9100 and ISO 14001 quality and environmental quality systems.
▪ Initiate and implemented FAA 14 CFR part 145 Repair Station, Engine Accessories and Airframe. Manual, SOP and Repair Instructions. Trained employees on FAA requirements.
 Scottsdale FSDO- FAA Contact the Office
17777 N. Perimeter Dr.
Suite 101

Education.
1979–1983 Mesa College Mesa, AZ
Business Administration; Global Marketing Management

1972 – 1976 USAF School of Aerospace Applied Sciences Wichita Falls, TX
Aerospace Engineering – 82nd ATC, FME Technical
Degree Related Civilian Occupation and D.O.T. Number 621.281
Aircraft Maintenance Specialist, Jet Aircraft 1 & 2 Engines 3ABR43131C
Aircraft Maintenance Technician T-38 Talon, General Electric (J85-GE-5)
Aircraft Maintenance Technician F5 Phantom II E, General Electric (J79-GE-17)
ASQ Member Manager of Quality/Operational Excellence (CQM/OE)

2012 – 2013. ASQ Membership # 65069649 Raleigh, NC
ISONet Training Institute Brea, CA

2009 Rompec Aerospace, Inc FAA Repair # R07R051X Phoenix, AZ
1998 Treffers’ Precision Plating and Coatings Quality Assurance Manager –
FAA Repair # TFPR634K

Scottsdale, Arizona 85255-5453
▪ Presented the FAA Diamond Excellence Award for quality and training.


-










Need a New Surge Protector Do We have A WorkersonwheelsDeal For You.

Enter the coupon code

  onwheels10

and save 10% on  Hughes      Autoformers website.

To link to Hughes Autoformers Website and save 10%